What Is the Lucidity 68007 LED Fault Eliminator?
The Lucidity 68007 LED Fault Eliminator is a smart load device designed to improve compatibility between modern tow vehicles and trailers, caravans, horse trailers and commercial trailers fitted with LED lights.
Many modern vehicles monitor trailer lighting circuits and expect to see a certain electrical load. Because LED trailer lights use far less power than traditional bulbs, some vehicles may incorrectly detect a fault and trigger dashboard warning messages, hyper-flashing indicators or intermittent trailer light errors.
Common Problems the 68007 Can Help Fix
- LED trailer light fault warnings
- Caravan LED light problems
- Dashboard bulb failure warnings
- CANbus trailer light faults
- Trailer indicator hyper-flash
- LED trailer lights flickering
- Trailer not detected by vehicle
- Intermittent trailer lighting faults
- Low-load LED trailer lighting errors
Who Needs a 68007 LED Fault Eliminator?
Caravan Owners
Many modern caravans are fitted with full LED rear lighting systems. When connected to newer tow vehicles, especially hybrids, plug-in hybrids and vehicles with sensitive trailer control modules, LED compatibility problems can occur.
The 68007 is ideal for caravanners experiencing dashboard warnings, fast flashing indicators, brake light errors or LED caravan lights behaving unpredictably.
Motorhome Owners Towing Trailers
Motorhome owners often tow motorbike trailers, small box trailers, luggage trailers and utility trailers. If the trailer uses LED lighting, the tow vehicle may require a load device to recognise the trailer lights correctly.
Commercial Trailer Operators
Commercial trailer fleets are moving to LED trailer lights because they reduce maintenance, improve visibility and last longer than traditional bulbs. The 68007 can help when fleet vehicles or towbar electrics are not fully compatible with low-load LED lighting systems.
- Plant trailers
- Box trailers
- Utility trailers
- Recovery trailers
- Beavertail trailers
- Construction trailers
- Traffic management trailers
- Commercial hire fleets
Horse Trailer and Boat Trailer Owners
Horse trailers and boat trailers fitted with LED rear combination lamps can also suffer from warning messages or intermittent lighting faults. The Lucidity 68007 helps provide a stable electrical load for improved trailer lighting compatibility.
Vehicles That May Require LED Compatibility Support
LED trailer lighting compatibility issues can vary depending on the vehicle, towbar wiring and trailer setup. Vehicles where LED trailer light problems are sometimes reported include:
- Nissan Navara
- Land Rover Discovery
- Range Rover models
- Ford Ranger
- Ford Transit Custom
- BMW X Series
- Volkswagen Amarok
- Volkswagen Transporter
- Mercedes Sprinter
- Mercedes Vito
- Modern hybrid vehicles
- Plug-in hybrid vehicles
- Electric vehicles
Why Do LED Trailer Lights Cause Warning Faults?
Traditional trailer bulbs draw more electrical current than LED lights. Modern tow vehicles often use the electrical load on each circuit to monitor whether trailer lights are working.
When a trailer or caravan is fitted with LED lights, the current draw can be so low that the vehicle may think a bulb has failed. This can cause dashboard warning lights, hyper-flashing indicators, trailer detection problems or lights switching off intermittently.
The Lucidity 68007 helps create the correct electrical load so many modern vehicles can recognise LED trailer lights more reliably.
Key Features of the Lucidity 68007
- Smart load device for LED trailer lighting
- Helps prevent CANbus trailer light faults
- Designed for caravans, trailers and horseboxes with LED lights
- Helps reduce bulb-out warnings and hyper-flash indicators
- Simple plug-in installation
- No coding or trailer rewiring required
- Sealed housing for towing environments
- Vibration-resistant construction
- Genuine Lucidity product
LED Fault Eliminator Fitting Instructions
The 68007 can be fitted to the trailer or caravan in several suitable positions, depending on access and cable routing.
Recommended Mounting Positions
- On the trailer A-frame
- Inside the trailer A-frame
- On the front board or headboard
- On a suitable chassis cross-member
Recommended Fixing Method
- Use M8 bolts where possible
- Suitable self-drilling tech screws may also be used
- Mount securely to prevent movement during towing
- Avoid using cable ties as the only fixing method
- Ensure cables are routed safely and protected from damage
Zip ties are not recommended as the main fixing method because vibration and road movement can cause them to weaken or fail when towing.
Typical Applications
- Caravans with full LED lighting
- Motorhomes towing trailers
- Horse trailers
- Boat trailers
- Plant trailers
- Utility trailers
- Commercial trailers
- Recovery trailers
- Car transporters
- Fleet and hire trailers
Why Buy from Trailer Solutions UK?
- Official UK reseller for Lucidity LED trailer lighting
- Free UK delivery
- Technical support available
- Trade and fleet pricing available
- Fast UK dispatch
- 30-day money-back guarantee on the 68007
Related Products
- Lucidity 68007 LED Fault Eliminator
- Lucidity 26024 LED Rear Combination Lamps
- Lucidity 26097 LED Rear Combination Lamp
LED fault eliminator, trailer light fault fix, caravan LED light problems, LED trailer light warning fix, CANbus trailer light fix, trailer bulb warning solution, LED trailer resistor, trailer LED compatibility device, caravan LED resistor, LED trailer light adapter, towbar LED fault fix, hyper flash trailer indicator fix, trailer light warning eliminator, 68007 fault eliminator, Lucidity 68007, LED trailer light load resistor, caravan trailer light warning fix, motorhome trailer light fault fix.
If your caravan, trailer or horsebox is fitted with LED lights and you are experiencing dashboard warnings, hyper-flashing indicators or CANbus trailer light faults, the Lucidity 68007 LED Fault Eliminator could be the solution. Order today from Trailer Solutions UK with free UK delivery.
